Float Switches & other sensors
Our range of Float Switches & other sensors are a reliable solution for domestic, and commercial applications.
If you need help selecting your Float Switches & other sensors or need a custom design system, Contact us.
Float Switch Counterweight
QuickStop Advance – Standard
QuickStop Advance – Adjustable
Waste Water Level Sensor – Agma W
Float Switch Alternative – Reka Compact
Clean Water Level Sensor – Agma 22
Sewage Float Switch – Standard – Mac5
Sewage Float Switch – Small – E-Fly
Float Switch Key
Float Switch Mac3
Float Switch Small
Float Switch Counterweight
Counterweight for Float Switches. Easily installed on to the Float Switch cable.QuickStop Advance – Standard
QuickStop Advance has a very high flow rate allowing rapid filling with minimal pressure loss. Designed as a replacement to conventional ballcock valves in water tanks to protect booster pumps, the QuickStop goes instantly from fully open to fully closed.QuickStop Advance – Adjustable
QuickStop Advance has a very high flow rate allowing rapid filling with minimal pressure loss. Designed as a replacement to conventional ballcock valves in water tanks to protect booster pumps, the QuickStop goes instantly from fully open to fully closed.
The arm on this Adjustable version can be easily altered by both length and mounting angle to set where the float sits relative to the regulator. Setting these two points allows for precise control of when the regulator is opened or closed by the movement of the float.
BSP Connections from 1/2” to 1 ½”.
Size 1/2” adjustable at point 1: 0 to 30 degrees. Other sizes adjustable at point 1: 0 to 150 degrees.Waste Water Level Sensor – Agma W
Mac3 AgmaW is a compact float switch alternative, designed to be fitted vertically to a submersible pump. When used for pump control, AgmaW activates a connected pump when the water levels are high enough for pump use, and deactivates the pump when the water level has decreased to the set minimum.Float Switch Alternative – Reka Compact
Reka capacitive sensor. At just 250mm long with no moving parts, the Reka is particularly suitable for Header Tanks, Shallow Tanks and confined spaces where there is not enough space for the movement of a traditional Float Switch. Suitable for Tank filling or maximum level control, high-level alarms or Flood Water detection.Clean Water Level Sensor – Agma 22
Mac3 Agma22 is a compact float switch alternative, designed to be fitted vertically to a submersible pump. When used for pump control, Agma22 activates a connected pump when the water levels are high enough for pump use, and deactivates the pump when the water level has decreased to the set minimum.Sewage Float Switch – Standard – Mac5
The Mac5 float switch is a Tilting Level Regulator specifically designed for sewage water. Can also be used in turbulent water and waters with high levels of solids.Sewage Float Switch – Small – E-Fly
E-Fly float switch is specifically designed for sewage and turbulent water. Can also be used in turbulent water and waters with high levels of solids. Smaller than the Mac5 Sewage Float Switch.Float Switch Key
Highly reliable and versatile Float Switch. It is the most universally used float switch in the world for the automation of pumps and storage tanks.Float Switch Mac3
Dimensions important to give a bigger buoyancy. The edgelesss shape makes is also suitable for sewage water. Dual operation for filling and emptying. Standard model is for emptying applications, if you need a model for filling please contact us.Float Switch Small
The most popular onboard drainage pumps. The most widely used by manufacturers of electric pumps that mount directly to the factory on their products