Calpeda GXRM 9 Submersible Drain Pump with Float Switch 240V

Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port and with open impeller.
Motor cooled by the pumped water passing between the motor jacket and the external jacket.
Double shaft seal with oil chamber.
Minimum dimension and high levels of performance, for use in many different applications, head up to 12.7 m and flow rates up to 220 litres/min.

– For clean water containing solids up to 10 mm grain size.
– For draining basements or for emptying tanks.
– Extraction of water from ponds, streams or pits and for rainwater harvesting systems.
– For irrigation purposes.
For outdoor use a power supply cable of not less than 10 m should be used in accordance with: EN 60 335-2-41.

Pumped liquid: Clean water with solids up to 10mm grain size.
Motor: 2-pole induction motor, 50 Hz
Max flow: 160l/min.
Max Head: 9m
Outlet Size: 1.25″ (female threaded outlet)
Dimensions: 176mm deep x 176mm wide x 265mm high
Weight: 5.4Kg
Waterproof protection rating: IPX8 (for continuous immersion)
Motor protection rating: F
Pump Type: Water cooled, single-impeller submersible pump.
Motor Body: Chome-nickel stainless steel (Stainless 304)
Rotor Shaft: Stainless 303.
Impeller: Chome-nickel stainless steel (Stainless 304)
Liquid temperature range: +0°C to +50°C
Maximum immersion depth: 5m (16ft).
Minimum water level: 70mm
Cable Length: 10m (H05RN-F) with plug.
CE Mark