Stop Sending Rainwater to Overflow our Sewers

Why Section 106 and the right to connect surface-water drainage are working against our rivers.

We have created a remarkable system for managing rainwater in the UK. Rain falls on a roof. We collect it in a pipe, transport it – sometimes with sewage – through an already overloaded drainage network, pump and treat some of it, and then, when the network cannot cope, discharge the mixture through a Combined Storm Overflow (CSO) into a river or the sea. Then we get angry about not being able to swim in our rivers and watch the biodiversity of our inland waterways die while also spending millions trying to stop sewage getting into our rivers.

Stop sending rainwater to the sewers to overflow the CSOs

The fundamental question is simple:

Why are we putting rainwater into the sewage system in the first place?

This is not an argument that every roof connection causes a storm overflow. It doesn’t. Catchment characteristics, rainfall intensity, sewer capacity, infiltration and many other factors determine when an overflow operates.

But hydraulically the principle is unavoidable: unnecessary rainwater entering a combined sewer consumes capacity that cannot then be used for sewage.

In England alone, 2024 saw 14,254 active storm overflows record 450,398 monitored spill events, with a combined duration of 3.61 million hours (that equates to more than 150,000 days!). Wales recorded a further 113,332 monitored storm-overflow discharges in 2024, with a combined duration of approximately 938,000 hours (that’s equivalent to more than 39,000 days of combined discharge time).

We should therefore be asking a much more fundamental question about new developments:

Why does rainwater need to enter the sewer at all?

The SuDS hierarchy already tells us the answer.

Wales has had statutory SuDS standards since 2019. England introduced its new National SuDS Standards as guidance in 2025. Both establish essentially the same principle: manage rainwater as a resource and work down a hierarchy from reuse and infiltration towards piped drainage, with combined sewer discharge at the bottom.

Both SuDS hierarchies are explicit:

  1. Non-potable use
  2. Infiltration
  3. surface water
  4. surface-water sewer
  5. combined sewer

The combined sewer is therefore not the preferred destination. It is the last resort. The English standard also says rainwater harvesting should be considered where there is a non-potable demand, including industrial and commercial applications.

Wales went further by removing the automatic right to drain surface water to the public sewer for relevant new development when it commenced Schedule 3 of the Flood and Water Management Act 2010 in 2019. The Welsh Government’s 2023 review noted that, before 2019, national SuDS standards were voluntary and had “little or no impact” on SuDS uptake. See our comparison of SuDS in Wales and England here.

Yet exemptions, exceptions and site-specific interpretations still mean that the hierarchy can be bypassed. We have written about this extensively.

The problem is therefore no longer a lack of policy. The problem is SuDS implementation and perceived economics of rainwater harvesting and reuse on site.

Reuse of Rainwater is part of the Solution

A roof is a remarkably predictable water-collection device.

Rainwater is a valuable resource - SUDS hierarchyThe scale of the opportunity is larger than it first appears. Mains water supplied to buildings is overwhelmingly of drinking-water quality, yet many end uses do not intrinsically require potable water. Water UK has estimated that drinking itself accounts for only around 4% of household water use, while toilet flushing, personal washing and outdoor use account for much larger shares. For commercial buildings, Thames Water’s water-resources planning identified approximately 60% of demand as non-potable, including WC and urinal flushing.

This does not mean that all of that demand can simply be substituted with untreated rainwater. But it does demonstrate the mismatch: we routinely use potable-quality water for applications where a properly designed and managed non-potable supply could potentially be used.

Yet conventional drainage design and planning legislation can send that same rainfall directly into the sewer while the building remains dependent on treated mains water for non-potable demands.

In this day and age, that is difficult to justify just from a resource management perspective, let alone to any person or business that has been impacted by hosepipe bans, fire risks or illness from swimming in our polluted rivers and seas.

Rainwater is a valuable resource

Rainwater harvesting and reuse technology isn’t theoretical. It is plumbing and a bit of electrics. Neither technology is exotic. Water reuse is already being designed into UK new-build housing, schools, offices, small and large housing developments. The question is increasingly not whether rainwater can be reused, but why conventional drainage design so often treats a potential water resource as something to be removed from the site.

The first question for new builds and retrofit applications should therefore be:

What can we use this water for here?

And particularly, what can we use it for outside the building, close to where it falls? Gardening. Irrigation. Vehicle washing. Yard washing. Dust suppression. Process water. Fire-water resilience where appropriate.

Only after those opportunities have been exhausted should the residual water need to be exported from the site.

The big stumbling block seems to be price. Here is where the current system becomes irrational. The developer sees the capital cost of a tank, pump system, infiltration system or blue roof. The costs of putting rainwater into the sewer are largely externalised.
The consequences and additional costs (the additional sewer capacity, pumping, treatment, overflow operation, environmental damage and ultimately investment in the receiving catchment) are distributed to the people and businesses already living and working within the area.

The housing and building market therefore receives the wrong signal.

Germany demonstrates that this can be changed.

Stuttgart separately charges for wastewater and rainwater. Its 2026 precipitation charge is €0.76 per square metre of relevant area connected to the public sewer. The city explicitly says that green roofs, permeable surfaces and cisterns can reduce the charge; areas not connected to the sewer can avoid the precipitation charge. Other areas, for example Berlin, have a precipitation charge of more than double that of Stuttgart. At €1.809 per square metre of relevant area connected to the public sewer, it makes the financial incentive to connect impermeable surfaces substantial.

This is important not because €0.76/m² or €1.80/m² is the correct British tariff.

It isn’t.

It demonstrates the principle: make drainage a cost that responds to what the landowner actually does with the rainwater.

The UK already has the beginnings of this approach. Ofwat says site-area charging better reflects the costs imposed on the drainage system and can provide a financial incentive to reduce surface-water drainage. Where surface water does not enter the public sewer, customers may also qualify for a drainage rebate.

What if discharging Rainwater directly to a public sewer had a price?

Imagine a deliberately provocative thought experiment. Suppose we followed the German example and impermeable areas connected to the public sewer attracted a charge of £1/m² per year.

A 10,000 m² commercial site would then face an annual surface-water charge of £10,000.

That changes the economics. A rainwater-harvesting, reuse and infiltration system is no longer simply an environmental nice-to-have. It becomes infrastructure that could have a measurable financial return, particularly where it can reduce the site’s chargeable drainage area as well as its mains-water consumption.

The £1/m² figure is purely illustrative. It is not a claim about current UK charging, nor a recommendation that £1/m² is the appropriate tariff. The point is to illustrate what happens when the cost of putting rainwater into public drainage becomes visible to the person making the development decision.
We should stop asking whether a development can connect its roof to the sewer.

We should ask how much rainwater can be used, infiltrated, stored and managed on site before a pipe is necessary.

Section 106 is a product of a drainage paradigm in which getting water safely away from a building was the objective. Today we know better.

A roof is not a source of wastewater.

It is a water resource.

And every litre of clean rainwater that we unnecessarily put into a combined sewer is a litre that has been given the wrong destination and a litre that could make the combined sewer overflow and pollute our waterways.

Use it where it falls. Keep it out of the sewer. And if we want the market to deliver that outcome at scale, put a real price on sending it away.

rainwater - use it as a valuable resource where it falls or waste it and help pollute downstream

Further Information

3P Technik offers a range of rainwater harvesting solutions for domestic, commercial and industrial applications.

Our filter systems help property owners, developers and organisations make better use of natural water resources while reducing reliance on mains water supplies.

By implementing rainwater harvesting systems, you can contribute to a more sustainable and resilient future while supporting responsible water management practices. Contact us for more information.

Scroll to Top
3P Technik UK Ltd
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.